Vortice MICRORAPID V0 Serie Manual De Instrucciones página 7

Ocultar thumbs Ver también para MICRORAPID V0 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
Impaginato 290
29-06-2006
!
Caution:
• Do not make modifications of any kind to this
appliance.
• Do not expose this appliance to the weather (rain,
sun, etc.).
• Do not insert any objects into the appliance.
• Make sure that the door protecting the controls is
closed properly after making any adjustments.
• Check the appliance for damage at regular
intervals. If you detect any damage, do not use the
appliance, but contact Vortice immediately.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by Vortice.
• If the appliance does not function correctly or
develops a fault, contact Vortice immediately.
Ensure that only genuine original Vortice spares are
used for any repairs.
• The appliance must be properly connected to an
electrical system in compliance with applicable
regulations, and must be equipped with an efficient
earthing system. If in doubt, have a qualified
electrician perform a thorough check.
• The appliance must be installed
by a professionally qualified electrician.
*(or an authorized Vortice dealer if you are outside the UK-Ireland territory)
16:54
Pagina 7
this symbol indicates precautions that must be taken to avoid damage to the appliance.
• Connect the appliance to the electrical power
supply only if the supply system is able to provide
the maximum electrical power required by the
appliance (data plate fig. 6). If it cannot do so,
arrange for a qualified electrician to make the
necessary modifications.
• Use a multi-pole switch with minimum contact gaps
of 3 mm to install the appliance.
• Never position the appliance directly under a power
socket.
• When positioning the appliance, always observe the
minimum distances from walls and surrounding
objects as shown in figs. 4-5.
• Install the appliance in an upright position only, as
shown in figs. 4-5.
• Switch off the appliance at the installation's main
switch: a) if the appliance does not function
correctly; b) before cleaning the outside of the
appliance, c) if the appliance is not to be used for
any length of time.
WARNING!
• Do not cover the appliance in order
to prevent dangerous overheating.
• Keep the appliance's intake and outlet
grilles free and uncovered.
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido