Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
BE CAREFUL NOT TO DAMAGE
THE CONE WITH THE POINTY OBJECT WHEN
REMOVING THE GRILLE
Step 2 – Ceiling tile cut out: The following
table lists the inner and recommended cut out
diameters for the different models and the
necessary depth in the ceiling structure to install
the speakers:
DEPTH REQUIRED
MODEL
(in)
CL-5, CL-5T
2.76
CL-6, CL-6T
3.15
CL-8, CL-8T
3.82
CL-6TB
6.3
Table 2: inner and cut out diameters
Packaged with the speakers is a cardboard cut
out template for scribing the cut out hole onto your
ceiling surface. The inside circumference of the
same template can be used to cover the rest of
the speaker when painting.
Therefore the cut out may be scribed using the
template provided or by drawing a circumference
of the diameter in table 2. Once the hole is cut,
you may need to pull down the cables so they are
accessible for connection.
Fig. 9 – circular cut out, installation wiring
6
CUT OUT DIAMETER
(in)
6.65
7.76
9.52
8.13
Manual del Usuario / Ceiling series / User's Manual
Step 3 – Terminal connection: the speakers
terminals are spring loaded. Watch the colour
coding for polarity. For connection to transformer
models, you will need to select the required input
power and connect to the appropriate terminals
(see Fig. 10).
Fig. 10 – CL-5T; input power selection terminals
Step 4 – Inserting the speaker: follow these
steps:
Hold the speaker in one hand, while you use
Ÿ
the other hand to connect the cable to the
speaker.
Push the assembly all the way into hole. The
Ÿ
four mounting tabs must be tangential to the ring,
otherwise they'll be in the way.
Fig. 11 – terminal connection; speaker positioning
Publicidad
