Editing An Existing Program; Cleaning And Maintenance; Technical Specifications - HQ-Power VDPC054 Manual Del Usuario

7. Press INSERT twice to save the scene in the current program.
The number of scenes in the SCENES display increases by 1.
8. Repeat steps 3-7 for all the next scenes that you want to program.
9. To quit programming and return to start mode, press and hold A for
± 2 seconds.

8.4 Editing an Existing Program

1. From start mode, press and hold A for ± 2 seconds.
2. Use UP and DOWN to select the program (1-9) that you want to edit.
3. Press INSERT once.
The dot blinks in the SCENES display.
4. Use UP and DOWN to select the scene that you want to edit.
5. Press B and use UP and DOWN to select the device/page that you want to
edit.
6. Move the faders to the desired position.
Caution: After you change devices/pages, the position of the faders does
not represent the real setting. Move the faders beyond the desired
position and back to make sure that the DMX value is set correctly.
7. Press INSERT to add the new scene.
8. Press DELETE twice to delete the old scene.
9. To quit programming and return to start mode, press and hold A for
± 2 seconds.

9. Cleaning and Maintenance

All screws should be tightened and free of corrosion.
The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
Disconnect the device from the mains prior to maintenance activities.
Wipe the device regularly with a dry, lint-free cloth. Do not use alcohol or
solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.

10. Technical Specifications

power supply
power consumption
channels
operating temperature
V. 02 – 11/09/2013
VDPC054
adapter 9-12 VDC
battery 9 VDC (6LR61C, not incl.)
0.7 W / 59 mA
54
-10 °C to 50 °C
9 ©Velleman nv