Troubleshooting - Hkoenig SWIP150 Manual De Usuario

CLEANING MICROFIBER PAD
l
Machine washable on "warm" setting. Always use a mild detergent.
l
For best care results, lay flat to dry；
l
IMPORTANT：Allow the steamer to fully cool down before performing any maintenance
or troubleshooting checks.
l
IMPORTANT ： Never use bleach or fabric softener when washing the microfiber
cleaning pad.
STORAGE
l
After the steamer is used, turn power off and then unplug the power cord.
l
Take out the water tank, and empty the residual water in the tank and clean the external
surface with a dry cloth. Until the steam mop cools down, clean appliances.
l
Remove the cleaning pad and wash it so that it will be ready for next use.；
l
Store product in a protected, dry area. Keep water funnel and measuring cup for future
use.；
l
Keep out of reach of children.
NOTICE ： After cleaning, take out the water tank before cut off the power, and then let the
product work for a while, until there is no steam. It can make pipe without water, good to
store.

TROUBLESHOOTING

Use troubleshooting guide as a first step to resolve any problems you may be experiencing.
All servicing should be done by an authorized service representative.
!Warning!:to reduce risk of personal injury-unplug steamer before servicing and allow to cool
PROBLEM
Reduced steam or no steam
Unit will not turn on
POSSIBLE REASON
Water tank may
empty
Steam nozzle may be
blocked
There is no power to the
unit
Didn't press power
button
Blown fuse or breaker
Power cord not plugged
in
Internal fuse is blown
POSSIBLE SOLUTION
be Fill water into the water tank
Clean steam nozzle
Make sure unit is plugged in
Press power button
Replace fuse or reset breaker in
home
Plug cord into a working circuit
Contact with customer service