Hkoenig SWIP150 Manual De Usuario página 8

FUNCTION AND SPECIFICATION
Function
l
removable water tank；
l
continuous steam output(up to 5 minutes continuously working , the steam averaged)：
26g / min；
l
Steam output time：15 to 20 min
l
Red and blue light, warm-up and work instructions；
l
pressure relief protection, keeping the pressure in the heating unit constant；
l
the angle of the rotation axis in the cleaner is greater；
l
A filter function in water inlet
Specification
l
Rated voltage：230V
l
Rated frequency： 50Hz
l
Output power：1500W (+5%,-10%)
l
water tank capacity：370mL
l
Waterproof level：IPX4
ASSEMBLY
NOTE: Each steam mop is 100% tested in the factory to ensure product performance and safety.
When assembling your new steam mop for the first time you may notice water residue inside of the
unit.
!WARNING: Before attempting any of the following operations, make sure that the appliance is
switched off and unplugged and that the appliance is cold and contains minimal or no water.
Attaching the handle
●
Slide the handle tube B into the handle A until it clicks into place；
●
Slide the handle tube C with handle installed to the main body F, until it clicks into place；
●
The handle can be removed from the steam mop body for easy storage by pressing the
Handle tube button；
Attaching the steam head
●
Slide the bottom end of main body C onto
The steam head E until steam head spindle 9
Clicks into place
●
The Steam head E can be removed from the
Main body C by pressing salient point on the Steam head E spindle