Optional Accessories - Comet FDX WB Manual De Instrucciones

Ocultar thumbs

Contenido

Idiomas disponibles

• bolts and screws;

• high pressure connection hose;

• spray gun;

• lance hose;

• bag of accessories with:

- instruction manual – safety precautions;

- this instruction - use and maintenance manual;

- the engine operating and maintenance manual;

- the declaration of conformity;

- the booklet giving the assistance centres;

- the warranty certificate;

- detergent suction hose kit including filter and clamp;

- nozzle cleaning needle;

- oil plug with vent.

In case of any problems please contact your Dealer or a

You can add the following range of accessories to the standard ones supplied with your high pressure

cleaner:

• sandblasting lance: designed to smooth surfaces, removing rust, paint, encrustations, etc.;

• drain cleaning kit: designed to unclog pipes and ducts;

• different types of lances and nozzles;

• rotating brush: designed for cleaning fragile surfaces;

• rotating nozzle: designed for removing stubborn dirt;

• foam lance: designed for a more efficient distribution of the detergent;

• Replace the pump oil plug without vent (35) with the oil plug with vent (27) provided.

in Fig. 2.

• Fasten the hose reel (12) to the hose reel support (45) using the kit provided: screws (5), washers (6)

and nuts (7) (using two 13 mm/0.5 in fixed spanners not provided).

• Fasten the handles (4) to the frame (3) using the kit provided: screws (5), washers (6) and nuts (7) (using

two 13 mm/0.5 in fixed spanners not provided).

• Connect the high pressure hose (25) to the hose reel (12) using a 22 mm/0.9 in fixed spanner (not

provided).

OPERATION C

• Connect the quick coupling (26) of the high pressure hose (25) to the water outlet fitting (15).

in Fig. 1.

OPERATION D

• Tighten the fitting (22) of the high pressure hose (30) to the thread of spray gun (19) and tighten well

using two 22 mm/0.9 in fixed spanners (not provided).

• Clamp (37) the free end of the detergent suction hose (31) to the detergent suction fitting (36).

in Fig. 4.

OPERATION G

• Fill the engine crankcase with oil, following the instructions given in the relevant operating and

maintenance manual.

• Do the preliminary activities described in the operating and maintenance manual of the engine

mounted on the high pressure cleaner. In particular remember to fill with fuel and check the level of

engine oil.

• When the engine is off and the machine is completely cold, check the level of pump oil by way of the

level indicator (38).