Skipping Tracks - Manta BBX002 Manual De Usuario

User's Manual E N
2. Press the CD FWD Skip Button (15) or CD REV Skip Button (15) to select the
song to be programmed.
3. Press the PROG. Button (4) again to store selection. The CD Track Display (6)
will advance to "P02".
4. Press the CD FWD Skip Button (15) or CD REV Skip Button (15) to select the next
song to be programmed and press the PROG. Button (4) to store selection.
5. You may repeat steps #2 - #3 to program as many as 20 tracks. If you attempt
to program more than 20 tracks, the CD Track Display (6) will revert to "01" and
the old entry will be overwritten by the current new entry!
6. Press CD STOP Button (5) to end programming and return to normal play mode.
7. To check the programmed tracks, press PROG Button (4) continuous to show all
the programmed songs. The CD Track Display (6) will display the program number
first and then followed by the flashing track number.
8. Press CD PLAY Button (11) to begin programmed play. The first track in program
will appear in the CD Track Display (6) and the PROG Indicator will steadily.
9. To cancel programmed play, press the CD STOP Button (5).
10. As long as the unit remains on and the CD Door (7) is not opened, you can
resume programmed play any time by pressing the PROG. Button (4) and then CD
PLAY Button (11) in stop condition
Note: when you operate this function , please make sure the mode is STOP.
Otherwise you would just find the selections to set the play more.
CD/ USB/SD
In CD mode, Press the CD FUCTON button (11) to switch to CD / USB / CARD
playback.
1. Press the CD FUCTON button (11) once(for one second) changing to USB
function
2. Press the CD FUCTON button (11) twice (for one second) changing to SD
function
3. Press the CD FUCTON button (11) third times (for one second) it returns to CD
play.

SKIPPING TRACKS

Press during play CD/USB/SD
Backward---------Press the CD REV Skip button(15)
Fast Forward---------Press the CD FWD Skip button (15)
11