Publicidad
SILO DE ALMACENAMIENTO CON FONDO DE TOLVA Y FONDO PLANO – SERIE AGRÍCOLA CORRUGADA DE
possibly two tiers if
4 IN
embling the wall sheets. Note: Consult the "Hardware
ual for the proper hardware usage throug
Figura 13. Posicionamiento del anillo de pico
nt
e Grain
heets.
top-ring
r 3 wall
ain
cerning
laid out
n this
e"
e
ions.
assembly to the top of the center post. Refer to the "bin-
Tabla 11. Referencias de figuras de posicionamiento del anillo de pico
heights and peak-ring sizes (Detail 2).
Artículo
anels by attaching
ng and the wide
3. Instale el anillo de pico (R) en el poste a la altura correcta (H) para el tamaño de silo que se está armando.
angle. It is
(Consulte
ttach four roof-
Tabla 12. Altura de anillo de pico y radio milimétrico (nivel 1 y 2)
f the bin; this will
k-ring for the rest of
Diám. de silo
hat the gap
nominal
he peak-ring is
(ft)
ail 1). Note that the
15
18
aligns with round
21
24
27
30
anels gets pushed into the foam closure. Once this occurs there is
33
he top end as the roof panel is embedded in the foam. Sometimes
36
" slightly from bundling, shipping and handling. It is relatively easy to
39
42
y but this should occur before the panel is seated in the foam.
45
ing roof panels with the underlying holes in the peak ring and make
48
efore anchoring the roof panel into the foam.
51
54
Page C2
ES-ENM-18914 R0
tier Uprights are included) is required
H
H
Altura
Anillo de pico (suspendido)
R
FIRST
C
Poste central
ROOF PANELS
IN 4 QUADRANTS
Tabla 12 en la página
41).
Radio milimétrico
(ft–in)
7 ft 4 – 3/4 in
2.255
8 ft 10 – 11/16 in
2.710
10 ft 4 – 9/16 in
3.164
11 ft 10 – 1/2 in
3.619
13 ft 4 – 3/8 in
4.074
14 ft 10 – 5/16 in
4.529
16 ft 4 – 3/16 in
4.984
17 ft 10 – 1/8 in
5.438
19 ft – 4 in
5.893
20 ft 9 – 15/16 in
6.348
22 ft 3 – 13/16 in
6.803
23 ft 9 – 3/4 in
7.258
25 ft 3 – 5/8 in
7.712
26 ft 9 – 9/16 in
8.167
the bin.
R
C
Descripción
Altura de parte superior de anillo de
pico "H"
(1 nivel de láminas de pared)
(m)
(ft-in)
7 ft 9– 3/8 in
8 ft 7 – 3/4 in
9 ft 6 – 1/16 in
10 ft 4 – 7/16 in
11 ft 2 – 3/4 in
11 ft 7 – 5/8 in
12 ft 5 – 15/16 in
13 ft 4 – 1/4 in
14 ft 2 – 5/8 in
15 ft 0 – 15/16 in
15 ft 11 – 5/16 in
16 ft 9 – 5/8 in
17 ft 5 – 5/8 in
18 ft – 4 in
Detail 3
Altura de parte superior de anillo de pico
(2 niveles de láminas de pared)
(m)
(ft-in)
2.372
11 ft 5 — 3/8 in
2.635
12 ft 3 – 3/4 in
2.897
13 ft 2 – 1/16 in
3.160
14 ft 0 – 7/16 in
3.423
14 ft 10 – 3/4 in
3.546
15 ft 3 – 5/8 in
3.808
16 ft 1 – 15/16 in
4.071
17 ft 0 – 1/4 in
4.334
17 ft 10 – 5/8 in
4.596
18 ft 8 – 15/16 in
4.859
19 ft 7 – 5/16 in
5.121
20 ft 5 – 5/8 in
5.325
21 ft 1 – 5/8 in
5.588
22 ft – 0 in
4. ARMADO
"H"
(m)
3.489
3.753
4.015
4.279
4.540
4.664
4.910
5.188
5.452
5.714
5.977
6.239
6.442
6.706
41
Publicidad
