Ironing With Steam Blast; Taking The Steam Iron Out Of Service - Kasanova SWO000016 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CORDLESS IRON
Select the best suitable temperature setting with the temperature controller
(7).
The control lamp for the temperature (6) glows. When the set temperature
has been reached, the temperature control lamp goes out.
Wait until the temperature control lamp extinguishes.
To moisten the laundry, press the spray button (4).
This function is suitable for every dry and very crumpled garment.
STEAM IRONING
Program the steam iron regulator (3) to the desired steam setting.
The temperature regulator (7) must be turned into at least the adjustment
range
. Otherwise it cannot produce any steam.

IRONING WITH STEAM BLAST

The steam blast is especially suitable for smoothing difficult to reach parts of a
garment.
Slightly raise the steam iron.
For a steam blast, press the steam blast button (5)
Temporarily setting the steam iron aside.
WARNING: Risk of fire
NEVER leave the hot, mains-connected or switched-on steam iron
unattended.
Place the temperature regulator into the position "MIN".
Place the steam iron only on the cable base or insert it onto the station.

TAKING THE STEAM IRON OUT OF SERVICE

Remove the plug from the wall power socket.
Empty the water tanks and clean the ironing sole (13).
Place the cooled sown steam iron on the station and secure it, in that you
slide the unlocking switch (10) into the position
The power cable (9) can be wrapped and stored around the cable retainer
(12) on the underside of the station.
.
.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido