Filling The Water Tank; Plugging In And Ironing - Kasanova SWO000016 Manual De Instrucciones

CORDLESS IRON
14

FILLING THE WATER TANK

• In a cooled condition, place the steam iron horizontally on its ironing sole
(13).
• Slide off the cover of the filler opening for the water tank (2).
• Using the measuring beaker, fill the water tank with water to :MAX:
marking, but no further.
• Slide the cover of the filler opening for water tank back to close it.
Note:
Should the mains water at your locality be eater as hard, it is recommended
that you mix mains water with some distilled water. Otherwise, the jet for the
steam blast function could calcify (become blocked) prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
Water hardness
Very soft / soft
The water hardness level can be queried at your local water works.

PLUGGING IN AND IRONING

Dry ironing without steam is possible as all temperatures, steam ironing is first
possible from the adjustment range on the temperature regulator (7)
• Insert the plug into a power socket.
WARNING:
• Check the care instructions on the labels in the garment to see if it is
suitable for being ironed, and at which temperature setting.
Symbol Temperature Regulator
Medium
Hard
Very hard
Ratios-distilled water to mains water
0
1:1
2:1
3:1
Type of Material
Acrylic, rayon
Silk, wool, polyester blended fabrics
Cotton, linen, viscose
.