Serial Numbers; Cleaning And Maintenance - Peg-Perego duette-triplette pop-up Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Lower the two seats' backrests fully (fig_a);
lower the footrest (fig_ 3a); only raise the leg
rest, by pushing it upwards (fig_b1), ensuring
the footrest remains lowered in the vertical
position. Ensure the leg rest is locked in place
by pressing both tabs inwards at the same
time (fig_b2).
To lower the leg rest, press both tabs
outwards at the same time, as shown in the
figure (fig_c).
WARNING: The footrest may only be
raised when the seat faces out from the
frame.
5• FIVE POINT SAFETY HARNESS: To fasten it,
push the two waist strap buckles (with the
shoulder straps attached – arrow_a) into
the leg divider until they click into place
(arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c)
and pull the waist straps out (arrow_d).
6• To tighten the waist strap, pull on both sides
in the direction of the arrow (arrow_a). To
loosen it, move it in the opposite direction.
7• To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
Pull the shoulder straps towards you
(arrow_a) until the buckles are released and
insert them in the backrest loops (arrow_b).
Remove the shoulder straps from the sack
(arrow_c) and insert them in the most
appropriate loop (arrow_d), then re-attach
the two buckles on the rear of the backrest
(arrow_e) The buckles are securely attached
when a click is heard (fig_f).
8• HOOD: To fasten, slide the attachments into
the sides of the seat (fig_a) and button the
hood to the back of the backrest (fig_b). To
remove the hood: pull out the attachments
and unbutton. To lift the hood: pull it
towards you; to close the hood: push it back.
The hood includes a slot from which you can
hang the child's favorite toy (fig_c).
9• When the backrest is fully reclined, open
the hood using the double slider on the
back (fig_a). To provide your child greater
ventilation, lift the hood section fastened
with Velcro (fig_b).
10• FASTENING THE SEAT TO THE FRAME: to
ensure the product is stable, we recommend
always installing all the Pop-Up seats. If for
any reason you are using the product with a
single occupant, we recommend you fasten
all the seats in any case, and make sure they
are properly docked.
The Pop Up seat can be secured to the frame
either facing mom or the world. Position it
and press downwards with both hands until
it clicks into place (fig_a). Make sure the seat
has locked into place by pulling it upwards.
11• R ELEASING THE SEAT FROM THE FRAME:
press the two buttons on the armrests of
the seat (fig_a) and then the two levers
underneath (fig_b); pull up the seat (fig_c)
until it releases.
12• F OLDING: you can fold up the frame without
releasing the Pop-Up seats (both facing
mom). To do this, lower the backrest of both
seats fully forward.
The stroller folds up more compactly if you
release the seats.
13• R EMOVING THE COVER: Unbutton the cover
along the armrests (fig_a) and the backrest
(fig_b), remove the cover from the footrest
(fig_c), unscrew (fig_d) and remove the
harness on both sides, and finally remove the
crotch strap from above, pushing from under
the seat (fig_e).
ACCESSORY
1 4•RAIN CANOPY: may be fastened to the hood
(fig_a).
MOSQUITO NETTING: can be fastened to the
hood (fig_b).

SERIAL NUMBERS

1 5•Duette/Triplette Pop Up reports information
as at the date of manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat.
This information is required for any
complaints.

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight
may give rise to colour changes of various
different materials; store this product in a dry
place.
CLEANING THE SEAT: periodically clean all
plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep
all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of
dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE RAIN CANOPY: wash with
a sponge and soapy water; do not use
detergents.
CLEANING FABRIC PARTS: brush fabric parts
to remove dust and wash by hand at a
maximum temperature of 30°C; do not wring;
do not use chlorine bleach, do not iron; do
not dry clean; do not apply solvent-based
stain removers and do not dry in a tumble
dryer.
- 9 -

Publicidad

Tabla de contenido
loading

Tabla de contenido