Clarke FOCUS Serie Manual De Instrucciones página 58

Figure 37
Figure 38
Figure 39
Page -58-
Maintenance
3. Using the joystick, position the front wheel
straight by doing one of the following:
a) Using black indicator marks on steering
system, realign front wheel (see figure 37).
b) Place front wheel straight by visually
estimating it's position (see figure 38).
4. Hold joystick in corrected position and
connect black wires together and key off the
machine (see figure 39).
5. Disconnect black wires.
6. Key machine on. If machine drives straight,
then proceed to step 7. If not, then repeat
steps 2-5.
7. Replace foot plate and screws.
8. Key machine on.
®
Clarke
Operator's Manual -Focus Rider Scrubber
EN