RS Pro IIT 1500 Manual De Instrucciones página 4

IIT 1500 English
CAUTION
• Disconnect the test leads from the test points before changing the position of
the function rotary switch
• Never connect a source of voltage with the function rotary switch in the Ω,
50V,100V,250V, 500V or 1000V position
• Do not expose the instrument to extremes in temperature or high humidity
• Never set the instrument in Ω, 50V,100V, 250V, 500V or1000V function to
measure the voltage of a circuit. This could result in damage to the tester and
the equipment under test.
Symbols as marked on the instrument and instructions leaflet

Risk of electric shock

See instruction leaflet
DC measurement

Equipment protected by double or reinforced insulation

Battery
+

Fuse

Earth

AC measurement

Conforms to EU directives
Dispose of in accordance with local regulations
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage, when the
instrument detects a voltage ≥2 V in resistance mode, ≥30 V in insulation test,
or a voltage overload (OL), the "  " symbol is displayed and the High Voltage
indicator is turned on. In this condition the test is inhibited.
4