Signs And Symbols Used En; Scope Of Delivery - Abicor Binzel iROB Feed 22/MP Instructivo De Servicio

iROB Feed
3.5 Signs and symbols used
In the operating instructions, the following signs and symbols are used:
Symbol Description
•

1
A

4 Scope of delivery

• Wire feeder iROB Feed
Tab. 8 Scope of delivery
• Unwinding device K300 iROB Spool
• Master liner
Tab. 9 Options
For an operational robot welding system, the following components are required:
• Robot welding power source iROB Pulse
• Connecting cable: Robot interface
(Power source) - Robot control
• Shielding gas welding torch including cable
assembly and torch mount
• Coolant recirculator iROB Cool (only for liquid-cooled torches)
Tab. 10 Robot welding system
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current catalogue.
Contact details for advice and orders can be found online at www.binzel-abicor.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to exclude the risk of
transport damage.
Goods inspection
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection)
In case of complaints If the delivery has been damaged during transportation, contact the last carrier immediately. Retain the
packaging for potential inspection by the carrier.
Packaging for return
Where possible, use the original packaging and the original packaging material. If you have any
questions about the packaging and/or how to secure an item during shipment, please consult your
supplier.
Tab. 11 Transport
4.2 Storage
For ambient conditions for storage in a closed environment:
 Tab. 3 Ambient conditions for operation on page EN-7
BAL.0331.0 • 2019-03-11
List of symbols for action commands and enumerations
Cross reference symbol refers to detailed, supplementary or further information
Action(s) described in the text to be carried out in succession
Action(s) described in the figure to be carried out in the indicated order.
• Operating instructions
• Fastening plate iROB Bracket (different versions available) for fastening to
the robot.
• Analogue robot interface RI 1000, digital robot interface RI 2000 or bus
interface RI 3000 with a BUS module
• Intermediate cable assembly
• Fastening device iROB Clamp: Intermediate cable assembly - Robot arm
4 Scope of delivery
EN - 9