Setting The Temperature; Storing Mixed Bottles; Turn The Light On/Off; Cleaning, Care & Maintenance - Polar Refrigeration W518 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Setting the Temperature

When turned On, the appliance will display the current temperature within the cabinet.
1.
Press the UP or DOWN buttons to display the set operating temperature.
2.
Note: The factory default setting is 10°C (50°F).
Use the UP and DOWN buttons to reach the desired operating temperature.
3.
To change the format the temperature is displayed in press the Fahrenheit/Centigrade button. The
4.
Fahrenheit or Centigrade LED illuminates showing which format is selected.
Note: Before using the appliance for the first time, clean with warm soapy water.

Storing Mixed Bottles

Due to a slight temperature variance between the top and the bottom of the wine cooler, POLAR
recommend that bottles of white wine are stored in the bottom of the wine cooler and bottles of red wine
at the top.

Turn the Light On/Off

Press the Light button on the control panel to turn the light On/Off.
Cleaning, Care & Maintenance
• Always switch off and disconnect the power supply before cleaning.
• Remove all bottles from the appliance.
• Warm, soapy water is recommended for cleaning. Cleaning agents may leave harmful residues.
• A POLAR agent or qualified technician should carry out repairs if required.
• Periodically clean the bottom of the wine cooler compartment to remove any build-up of condensation.

Replacing the Bulb

Switch off the wine cooler and disconnect from the power supply.
1.
Unscrew and remove the bulb cover from the roof of the wine cooler compartment.
2.
Unscrew the bulb and replace with a new one.
3.
Note: The bulb should be replaced with a SES 240V 10W bulb (Spare Code: AA391).
Screw the bulb cover back on to the roof of the compartment.
4.
UK
4