Package Contents - Powers Fasteners F16 Instrucciones De Uso

BradNailer F16 Op Man_NEW.qxd
MODEL F16
Do not use the tool on a ladder.
• Never point any operational fastener driving tool at yourself or
at any other person.
• While working, hold the tool in such a way that no injuries can
be caused to the head or to the body in the event of a
possible recoil due to a disruption in the energy supply or hard
areas within the workpiece.
• Never actuate the fastener driving tool into free space.
• In the work area, carry the tool at the workplace using only
one handle, and never with the trigger actuated.
• Consider the conditions in the work area. Fasteners can
penetrate thin workpieces or slip off corners and edges of the
workpiece, and thus put people at risk.
• Do not drive fasteners close to the edge of the workpiece.
• Do not drive fasteners on top of other fasteners.
ADDITIONAL SAFETY INSTRUCTIONS FOR
BATTERY PACKS AND CHARGERS
• Make sure that the battery pack is dry and clean before
inserting it into the charger.
• Use only chargers labelled "NiMH" to charge Powers F16
NiMH battery packs.
• Never carry the charger by its cord. Never pull the cord to
disconnect from the socket. Keep the cord away from heat, oil
and sharp edges.
• Do not expose the charger to damp or wet conditions.
• Do not attempt to charge wet battery packs.
• Never attempt to open a battery pack for any reason.
• Always follow the instructions in the back of this manual for
battery pack disposal.
• When not in use, chargers and battery packs must be stored in
a dry place and locked up securely, out of reach of children.
LABELS ON CHARGER AND BATTERY PACK
In addition to the pictographs used in this manual, the labels on
the charger and the battery pack show the following pictographs:
Battery charging
Battery charged
Battery defective
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
12
18/8/08 1:39 PM Page 12

PACKAGE CONTENTS

The package contains:
1 Nailer
1 Charger
2 Battery packs
1 Safety glasses
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
DESCRIPTION (FIG. A, PAGE 3)
Your nailer has been designed for driving fasteners into wooden
workpieces.
1
2
3
4
5
6
7
8
9
CHARGER
Your charger accepts Powers F16 NiCd battery packs ranging from
7.2 to 18 V.
9 Battery pack
10 Release buttons
11 Charger
12 Charging indicator (red)
Use only with Powers F16 battery packs, others
may burst, causing personal injury and damage
Do not expose to water
Have defective cords replaced immediately
Charge only between 4 °C and 40 °C
Discard the battery pack with due care for the
environment
Do not incinerate the battery pack
Charges NiMH and NiCd battery packs
See technical data for charging time
On/off switch
Contact trip lock-off
Depth adjustment wheel
Headlights
Contact trip
Magazine
Mode selector switch
Belt hook
Battery pack