Technical Data; Ec Declaration Of Conformity - Powers Fasteners F16 Instrucciones De Uso

BradNailer F16 Op Man_NEW.qxd
MODEL F16
CONGRATULATIONS!
You have chosen a Powers tool. Years of experience, thorough
product development and innovation make Powers one of the most
reliable partners for professional power tool users.

TECHNICAL DATA

Sound pressure (L )
pA
Acoustic power (L )
WA
Hand/arm weighted vibration
Voltage
Actuating mode
Magazine angle
Fasteners
type
length
shank diameter
angle
Weight (without battery pack)
Battery pack
Battery type
Voltage
Capacity
Weight
Charger
Mains voltage
Battery type
Approx. charging time
Weight
1) K (sound pressure uncertainty): 3 dB(A)
pA
2) K (acoustic power uncertainty): 3 dB(A)
WA
This value is a tool-related characteristic value and does not
3)
represent the influence to the hand-arm-system when using
the tool.
The influence to the hand-arm-system when using the tool will for
example depend on the gripping force, the contact pressure force,
the working direction, the adjustment of energy supply, the
workpiece and the workpiece support.
Measurement uncertainty: 3.25 m/s
Fuses:
Europe
U.K. & Ireland
18/8/08 1:39 PM
F16
dB(A) 85.9 1)
dB(A) 92.6 2)
m/s 13.6
2 3)
V 18
DC
contact
actuating
0°
16 Ga
mm 19–64
mm 1.6
0°
kg 2.8
68816
NiMH
V 18
DC
Ah 2.6
kg 1.0
68817
V 230
AC
NiMH
min 30
kg 0.5
2
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
Page 9
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to
vibration should also take into account the times
when the tool is switched off or when it is
running but not actually doing the job. This may
significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
EC-DECLARATION OF CONFORMITY
F16
Powers declares that these products described under "technical
data" have been designed in compliance with: 98/37/EEC (until
Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009), 2004/108/EC,
2006/95/EC, EN 55014-1, EN 55014-2, EN 792-13, EN 12096
EN 60745-1.
For more information, please contact Powers at the address below,
or refer to the back of the manual.
9