Rotary Switch Positions
Button
Press MODE button to toggle between MAX, MIN, DIF, and AVG options.
MODE
When the thermometer goes into sleep mode, press MODE to turn the thermometer ON
again and it displays the last measurement result.
Press to enter set-up mode stepping through Emissivity, Trigger Lock and Switching °C/°F
SET
set-up. Details refer to the below Emissivity, Trigger Lock and °C / °F set-up.
Press
/
When the thermometer enters the setup up mode, press
(Emissivity, Trigger lock, Switching °C / °F).
Press
/
When the thermometer enters the setup up mode, press
(Emissivity, Trigger lock, Switching °C / °F).
Emissivity set-up
1. Press SET button to select Emissivity set-up, icon
2. Press
to increase the value by 0.01. Press and hold
3. Press
to decrease the value by 0.01. Press and hold
4. Press MODE button to complete the setting and exit Emissivity set-up, or press SET button to complete the setting
and continue setting for Trigger Lock.
Note: Default emissivity is 0.95.
to turn the display backlight ON or OFF.
to turn the laser light ON or OFF.
Description
is blinking on the display
for quick setting. The maximum value is 1.00.
for quick setting. The minimum value is 0.01.
5
to select a set-up option
to select a set-up option