CU 3800
Insert the ends of the knives into the retainer on the motor device.
•
With the frozen food knife (5) you can only cut frozen foods without bones. With the normal
•
knife (4) you can cut: fresh bread, meat, roasts etc.
Press the blades in the direction of the motor device until the ends are felt to lock in place.
•
Check that they are firmly attached.
Insert the plug in a duly installed 230 V~50 Hz socket.
•
SWITCHING ON
Please note that for safety reasons the knife can only be switched on if switches 2 and 3
•
pressed.
Do not exert too much pressure when cutting; allow the knife to do the cutting.
•
After use, please remove the plug from the socket and take out the blades by pressing button 1
•
CLEANING
Remove the mains plug from the socket.
•
Please take care with the sharp knives!
•
Clean the individual parts in the usual way in soapy water.
•
The housing of the motor device can be wiped off with a slightly moistened cloth. Do not
•
immerse the motor device in water!
Illustration 1
2
1
3
12