Before Using The Appliance The First Time; Operation - Toasting - Unold onyx Big Instrucciones De Uso

Ocultar thumbs Ver también para onyx Big:
Tabla de contenido

Publicidad

face, since otherwise they could
burn.
7.
Cut rolls in half before toasting.
8.
If you toast only one slice, please
select a low toast darkness set-
ting.
9.
If you toast several slices one
after the other, the bread will

Before using The appliance The firsT Time

1.
Remove all packaging materials
and any transport safety devices.
2.
Confirm that all accessories men-
tioned have been supplied.
3.
Clean the toaster with a damp
cloth, as described in the chapter
"Cleaning and care".
4.
Confirm that all components are
properly assembled and the appli-
ance is placed firmly.
5.
Make sure that there is enough
space between the toaster and
the wall or other appliances, as
the toaster will become hot during
operation.

operaTion - ToasTing

This appliance is a combination of two individually working toasters, which al-
low you to toast two to four slices of bread at a time. Furthermore, you may use
one part of the appliance to toast bread and the other to thaw or heat pastries.
1.
Prepare the toaster as described
in chapter „Before first use".
2.
Put the slices of bread into the
slots of toast chamber.
3.
Select the desired toasting grade
using the roasting grade selec-
tor. The adjustment is conti-
nuous, corresponding level 1 to
light toasting and level 5 to dark
toasting. The toast will be golden
brown when you adjust the selec-
tor to a medium toasting grade.
4.
Push the toast levers down until
they latch into place. The indica-
be somewhat darker at the same
toast darkness setting.
10. To toast frozen bread, waffles,
etc. please use the thaw button.
11. To warm rolls, please use the bun
warmer.
6.
Connect the appliance to the
mains supply by means of the lead
cable (220–240 V~, 50/60 Hz).
7.
Before using the toaster for the
first time, you will have to per-
form a toasting process without
bread. Press the toast levers on
both toaster parts down until they
latch into place.
8.
When the toasting is finished, the
toast levers automatically jump
up. You may now start toasting
bread.
tor light for „Stop" lights up and
the toasting process starts.
5.
You may interrupt the toasting
process at any time pushing the
button „Stop".
6.
When the selected toasting grade
is achieved, the bread is ejected
automatically. The appliance will
be shut off.
7.
In order to easily remove the
toasts, the toaster has a lifting
feature. To remove the toast, just
push the toast lever slightly up.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

38815

Tabla de contenido