Description Of The Safety-Lift Technology - Unold Safety Lift 75014 Manual De Instrucciones

13. The appliance becomes very hot during
operation. Do not touch any hot parts of the
appliance in order to avoid burns.
14. The released steam is also very hot. Avoid
any contact with the steam and never direct
the steam jet towards persons in order to
avoid burns.
15. The recently ironed clothes and the cover of
the ironing board may also become very hot
while ironing.
16. Do not place the appliance or lead cable
near open flames during operation.
17. Always use the appliance on a level,
uncluttered and heat-resistant surface.
18. Always switch the appliance off (turning
the rotary switch to „AUS/OFF" before
disconnecting the plug from the wall
socket.
19. Always disconnect the lead cable from the
wall socket pulling on the plug, never on the
cable.
20. Always unplug the appliance even when you
leave the workplace for a short time and
before cleaning and let the appliance cool
off.
21. For safety reasons unplug the appliance
when filling the water tank directly from the
tap.
the manufacturer does not assume any warranty in case of improper or incorrect use or after repair by
unauthorized third parties.

DeScription of the Safety-lift technology

1. Put the iron on an even surface. Connect
the plug to a wall socket and check if the
switch for the Safety-Lift mode is adjusted
to „EIN/ON".
2. As soon as you touch the handle of the
iron, the appliance lowers and you may
start ironing as usual. When you release
the handle, the Safety-Lift feature lifts the
appliance immediately. This avoids that
the hot iron soleplate damages to the cloth
being ironed.
Disconnecting the Safety-Lift mode
1. Cancel the mode by turning the switch to
„AUS/OFF". The appliance now works like
a normal iron.
22. Never leave the appliance unattended when
it is connected to the wall socket.
23. When the appliance has cooled off, loosely
wrap the cable around the appliance before
storing.
24. Never open the casing of the appliance to
prevent electric shock.
25. Check the appliance, the wall socket and
the lead cable regularly for wear or damage.
In case the lead cable or other parts present
damages, please send the appliance or the
base to our after sales service for inspection
and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
attention: the Safety-Lift feature is an
additional feature that facilitates iro-
ning. Nevertheless, this is no release
from handling the appliance with the
corresponding care.
the appliance becomes very hot during
operation!
2. Even in this mode, an additional safety
device ensures that the appliance is lifted, if
the handle is not touched within 1 minute.
More information on the automatic shut-off
can be found on page 19.
attention: the Safety-Lift feature is an
additional feature that facilitates iro-
ning. Nevertheless, this is no release
from handling the appliance with the
corresponding care.
15