Care And Maintenance Instructions; Cleaning The Filter - Robot Roomba e6 Guia Del Usuario

Care and Maintenance

Care and Maintenance Instructions

To keep your Roomba ® robot vacuum running at peak perfor-
mance, perform the procedures on the following pages.
There are additional instructional videos in the iRobot HOME
App. If you notice the robot picking up less debris from your
floor, empty the bin, clean the filter and clean the brushes.
Care and Maintenance Overview
Part Care
Bin Empty after each use
Filter Clean every week (twice a
week if you have a pet)
Front Caster Clean every 2 weeks
Wheel
Edge- Clean every month (twice
Sweeping a month if you have a pet)
Brush and
Multi-Surface
Brushes
Full Bin Sensor Clean once every 2 weeks
Sensors and Clean once a month
Charging
Contacts
Note: iRobot manufactures various replacement parts and
assemblies. If you think you need a replacement part, please
contact iRobot Customer Care for more information. Ask
Customer Care "Or visit an authorized iRobot
* Replacement frequency may vary. Parts should be replaced
if visible wear appears.
Emptying the Bin
1
Replace* Details
2
Page 3
Every 2 Page 3
months
Every 12 Page 4
months
Every 12 Page
months 4-5
3
n/a Page 5
Page 5
dealer."
®
Press bin release
button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.

Cleaning the Filter

1
Release the bin. Remove the
filter by grasping both ends
and pulling out.
2
Shake off debris by
tapping the filter against
your trash container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not run
if the filter is not installed correctly.
Replace the filter every two months.
Roomba e6 Owner's Guide
®
EN
4