ELECTRONIC CORDLESS TYING MACHINE
10.1 BATTERY CHARGING PROCEDURE
•
Charge at temperature of +10°C ~ +22°C indoor.
•
The three-way battery charger allows you to recharge the 2 batteries
supplied at the same time
•
Make sure specifications on battery and adapter matched before
charging.
•
Connect the plug of the battery charger to the battery to recharge it (if it
is necessary it is possible to connect all two batteries at the same time).
•
The batteries will be recharged simultaneously.
•
The Red LED on the battery charger indicates that charging is in progress,
the Green LED indicates that the batteries are fully charged. The average
charging time is 2/3 h for each battery.
•
Please make sure the battery charged at least once every 4 months when
the battery is not using.
11. WORKING ENVIRONMENT
•
Keep temperature of environment at 0°C ~ 45°C when charging battery,
-10°C ~ +60°C when battery is working.
•
Keep tool at temperature of -5°C ~ 30°C when working
12.
ASSEMBLE BATTERY
Please check if tying machine and battery are clean and dry, then conduct
assembly according to the following steps:
•
Take the previously charged battery from the case and insert it in the
appropriate seat of the tying machine
•
See the following figures:
71
www.kamikazevolpi.com