ELECTRONIC CORDLESS TYING MACHINE
Remove the remaining thread with the tweezers.
Insert the thread press carriage and place the front cover correctly. The tool
can now continue to work with the new thread.
14. CLEANING AND MAINTENANCE
Before to start any cleaning or maintenance operation, switch off the
machine and disconnect the battery to the machine. Place battery in
a safe package.
•
Cleaning and maintenance must be carried out regularly to ensure the
long-term and reliable operation of the equipment.
•
Don't spray water on the equipment or immerse it in water, otherwise the
equipment will be damaged.
•
Keep ventilating slot, engine chamber, and equipment handle clean. It
shall be cleaned with a wet cloth or a hair brush. Don't use any cleaning
agent; otherwise it may cause permanent damage to the equipment.
•
Each time after one roll of tying wire is used up, please use tweezers or
77
www.kamikazevolpi.com