[4]
[5]
[6]
CHG
Page 8
LASER LIGHT SOURCES
It activates in an individual way a source of light of 1310 nm, 1490
nm or 1550 nm. There is a button to activate each one.
At first press on one of these buttons it turns on the corresponding
source of continuous light. LED is GREEN.
At second press again on the same button it switches to the same
source of light but modulated. LED is AMBER.
At every press it switches between continuous and modulated
light.
When pressing for more than one second it turns off the light and
the LED.
These three light sources can work simultaneously.
SEQUENCING.
Button with three states:
First press:
Second press:
Third press:
CHARGE LED
It indicates the state of the battery charge.
When the LED is in AMBER means that is charging.
When the LED is in GREEN means that is in full charge and it is
being powered through the means.
Figure 2.- Side view PROLITE-105.
USER'S MANUAL. PROLITE-105
All laser sources without modulation are
activated.
All laser sources are activated sequentially
in modulated mode.
It disables all laser sources.
03/2011