Disposal Of The Old Device; Guarantee - Caso WK2200 Operación Manual

Problem
The device switches off
before boiling or before it
has reached desired
temperature.
The device does not switch
off.
The device cannot be
switched on.

18 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not
put your old device into the non-recyclable waste under any circumstances.
Please note
Utilise the collection point, established in your town, to return and recycle old electric
►
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
►

19 Guarantee

We provide a 24 month guarantee for this product, commencing from the date of sale, for
faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected
by this.
The guarantee does not include damages, which were incurred as a result of improper
handling or use, as well as malfunctions which only have a minor effect on the function or
the value of the device. Consumables, transit damages, inasmuch as we are not
responsible for these, as well as damages, which were incurred as a result of any repairs
that were not performed by us, are also excluded from the guarantee entitlements.
This device is designed for use in domestic situations and has the appropriate
performance levels.
Any use in commercial situations is only covered under the guarantee to the extent that it
would be comparable with the stresses of being used in a domestic situation. It is not
intended for any additional, commercial use.
caso WK2200
Cause
Too much scale in the pot.
The lid is not closed
correctly, the mesh is not
inserted correctly.
The device has not cooled
down sufficiently.
Solution
Descale the device.
Close the lid correctly. Place
the mesh into device
correctly.
Allow the device to cool
down.
34