ratiotec X 400 Manual De Instrucciones página 6

[EN]
Setting
1. Press the CURR button for three seconds to call up the user menu.
2. Press the ARROW buttons to navigate the menu. Then you can confirm the settings with the CURR button.
3. After the adjustment is completed, press the CLEAR button to exit the menu.
Operation
Connect the mains cable and switch the machine on. The machine will now run a self-test. After the test is suc-
cessfully completed, the device is ready for use. If error messages occur, refer to page 8 of the user manual for an
overview of the error messages with solution.
Fan the banknotes slightly and place the stack of banknotes to be counted in the middle of the banknote feeder.
To guarantee a perfect operation, regular cleaning and maintenance of the device is imperative.
Deposits that build up over time, such as dust on optical sensors, can lead to an increasing number of error
messages.
Use the correct cleaning set and the compressed air spray from ratiotec.
6