Accessories (Options); C Marking - Denver MAXX Serie Manual De Instrucciones

Accessories (Options)

Product
Data interface, mounting kit
– RS-232 interface with cable
– USB interface with cable
Data printer
Lock-down capability
(for anti-theft locking device)
Calibration weights
– for MXX-5001 (5 kg; F2)
– for MXX-2001 (2 kg; F2)
– for MXX-10 (5 kg; M1)
– for MXX-5 (5 kg; M2)

C Marking

The balance/scale complies with the
following EC Directives and European
Standards:
Council Directive 89/336/EEC
"Electromagnetic compatibility
(EMC)"
Applicable European Standards:
Limitation of emissions:
In accordance with product standard
EN 61326-1 Class B (residential area)
Defined immunity to interference:
in accordance with product standard
EN 61326-1
(minimum test requirements,
non-continuous operation)
Important Note:
The operator shall be responsible
for any modifications to Denver equip-
ment and must check and, if neces-
sary, correct these modifications.
On request, Denver will provide infor-
mation on the minimum operating
specifications (in accordance with the
Order No.
YADAP-RS
YADAP-USB
901042-1
LC-1
YCW6548-00
YCW6248-00
YCW655-00
YCW626-00
Standards listed above for defined
immunity to interference).
73/23/EEC "Electrical equipment
designed for use within certain
voltage limits"
Applicable European Standards:
EN 60950
Safety of information technology
equipment including electrical busi-
ness equipment
EN 61010
Safety requirements for electrical
equipment for measurement,
control and laboratory use
Part 1: General requirements
If you use electrical equipment
in installations and under ambient
conditions requiring higher safety
standards, you must comply with
the provisions as specified in the
applicable regulations for installation
in your country.
19