Operation; Basic Weighing Function; Description Of The Keys - Denver MAXX Serie Manual De Instrucciones

Operation

Basic Weighing Function

Features
– Zeroing the balance/scale
You can zero the balance/scale within
the entire weighing range, up to the
maximum capacity.
Preparation
§ Switch on the balance/scale:
press the (ON/OFF) key
§ If necessary, zero the balance/
scale: press the (ZERO) key
$ If necessary, change the configura-
tion settings: see the chapter
entitled "Configuration"
$ If desired, load the factory settings:
see the chapter entitled
"Configuration, " menu item 9.– 1
Additional functions:
$ Switching off the balance/scale:
press the (ON/OFF) key
$ Battery operation: automatic shut-off
after 2, 5 or 10 minutes; see chapter
on configuration. Example: 2 min-
utes. If the weight readout remains
unchanged and no keys are pressed
for at least two minutes, the battery
symbol "
After another 2 seconds, the
balance/scale shuts off automati-
cally, unless a key is pressed.
Example: Determine weight of sample
Step
1. Switch on the balance/scale
Self-test runs
Display: Software version
2. Place container on the balance/scale
(in this example, 52 g)
3. Zero the balance/scale
4. Place sample in container on
balance/scale (in this example, 150.2 g).
8
" starts flashing.

Description of the Keys

(ON/OFF) On/off key: switches the
balance/scale on and off or
switches it to the standby
mode.
Battery operation: on;
turns backlight on; off
(ZERO) Zeros the balance/scale;
press and hold 2 seconds:
opens the application menu
(CAL) Starts calibration/adjust-
ment
(F) Starts an application pro-
gram; scrolling in applica-
tion menu, configuration
menu and calibration menu
(ENTER) Confirms the selected
setting; exits application,
configuration & calibration
menu if key is pressed
and held for at least
2 seconds.
(PRINT) Generates a printout or
data output
Key (or instruction)
(ON/OFF)
(ZERO)
Display
r 31.01
g
52.0
g
0.0
g
150.2
g