Ibiza Light STROBE40LED Manual De Uso página 2

EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electro-
cution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
The unit complies with CE standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Protection class I. Requires an earth connection
SAFETY INSTRUCTIONS
•
Please read and keep this User Manual for future reference.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of
the unit.
•
The unit is for decorative purposes only. It is not suitable for normal household illumination.
•
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be
sure that no ventilation slots are blocked.
•
Disconnect mains power before fuse replacement or servicing.
•
EN The unit is part of protection class I and must only be plugged into an earthed mains outlet.
•
Replace fuse only with the same type.
•
Make sure there are no inflammable materials close to the unit during operation.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunc-
tion. Please contact the nearest authorized technical assistance center and always use the same type of spare
parts.
•
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent
that their effectiveness is impaired, for example by cracks or deep scratches.
•
If some LEDs are damaged, contact your dealer or discard the unit. The light source is not replaceable.
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
OPERATION
•
Plug the strobe into an appropriate mains outlet that delivers a voltage of 220-240V~ 50/60Hz.
•
Set the desired flash speed and sound sensitivity via the knobs on the rear panel.
•
Unplug the unit from the mains when you don't use it anymore.
SPECIFICATIONS
LED quantity
Power supply
Consumption
Dimensions
Weight
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local au-
thorities or your dealer about the way to proceed.
2
Manual - STROBE40LED/STROBE80LED
INSTRUCTION MANUAL
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
STROBE40LED
2 x 20W LED
220-240V~ 50/60Hz
40W
202 x 70 x 115mm
0.7Kg
©Copyright LOTRONIC 2020
STROBE80LED
4 x 20W LED
80W
310 x 70 x 115mm
1kg