Risk Of Fire - Yamaha YDREX5 PTV Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
The AC line connected to the charger
must be capable of supplying 12
Amperes to the charger. AVOID
connecting a charger and another
device to a single 15A/20A circuit or
the circuit may become overloaded.
Also, maximum Ampere varies
depending on AC voltage. Please
refer to "AC Input" in General
Specifications.
RISK OF FIRE - Use this charger
only on circuits with a 15-amp or
higher branch circuit protection
(circuit breaker or fuse) in
accordance with the national
electrical code, ANSI/NFPA 70 and
all applicable local codes and
ordinances.
When using an extension cord,
use only a grounded, 3-wire, 12-
AWG cord no longer than 15 m
(50'). The use of an improper
extension cord could result in a
risk of a fire or electric shock.
JC1
MAINTENANCE
The output of chargers with
greater than 48 volts may pose an
energy and/or shock hazard under
normal use.
1
2
3
4
5
6
7
8
9
10
11
7-10

Publicidad

Tabla de contenido
loading

Tabla de contenido