Bosch GLL 3-50 Instrucciones De Funcionamiento página 16

BM 2610A16273 07-13_BM 2610A16273 07-13 7/30/13 2:02 PM Page 16
– Turn the laser tool by 180°, allow it to level in and mark the cross point
of the laser lines on the opposite wall B (point II).
– Without turning the laser tool, position it close to wall B. Switch the laser
tool on and allow it to level in.
– Align the height of the laser tool (using a tripod or by underlaying, if
required) in such a manner that the cross point of the laser lines is
projected against the previously marked point II on the wall B.
A
180˚
A
A
d
-16-
B
B
B
180˚