BM 2610A16273 07-13_BM 2610A16273 07-13 7/30/13 2:02 PM Page 22
The laser target 21 has a reflective coating that enhances the visibility of
the laser beam at greater distances or in intense sunlight. The brightness
intensification can be seen only when viewing, parallel to the laser beam,
onto the laser target.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable measuring support. Put the laser
tool onto the thread of the tripod 22 or of a commercially available
construction tripod using the 1/4" tripod mount 6. Tighten the laser tool
using the tripod's locking screw.
Working with the Laser Receiver (Accessory) (see figure E)
Under unfavourable light conditions (bright environment) and for larger
distances, use the laser receiver for improved detection of the laser lines
26. When working with the laser receiver, switch the pulse function on (see
"Pulse Function", page 12-14).
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient light. This makes the red
light of the laser appear brighter for the eyes.
Do not use the laser viewing glasses as safety goggles. The laser
viewing glasses are used for improved visualisation of the laser beam, but
they do not protect against laser radiation.
Do not use the laser viewing glasses as sun glasses or in traffic. The
laser viewing glasses do not afford complete UV protection and reduce
colour perception.
Work Examples
Work Examples (see figures A –F)
Applicational examples for the laser tool can be found on the graphics
pages.
-22-