Technical Data - Weidmuller VT Instrucciones De Empleo

For DC voltage, the polarity of the voltage dis-
played refers to the instrument test probe (+).
7.0 Maintenance
When using the instrument in compliance with the
instruction manual, no special maintenance is re-
quired. Should operational problems occur
during daily use, our consulting service will be at
your disposal, free of charge.
If functional errors occur after expiration of war-
ranty, our after sales service will repair your instru-
ment without delay.
7.1 Cleaning
If the instrument is dirty after daily usage, it is ad-
vised to clean it by using a humid cloth and a mild
household detergent. Prior to cleaning, ensure
that instrument is disconnected from
external voltage supply and any other instruments
connected. Never use acid detergents or dissol-
vants for cleaning. After cleaning, do not use the
voltage tester for a period of approx. 2h.

8.0 Technical Data

Voltage Range
LED-resolution
Tolerance
AC/DC voltage
detection
Range detection
Response Time
Frequency Range
Internal Load
Test Current
Duration Time
Recovery Time
Auto-Power-On
Overvoltage Protection 690 V AC/DC
Temperature Range
Humidity
Height above sea level up to 2000 m
Measurement Cat.
Pollution Degree
Protection Degree
Safety acc.
Weight
Dimension
12
12...690V AC/DC
+ /- 12, 24, 50, 120, 230, 400, 690V
acc. EN 61243
automatically
automatically
<0,1s
DC, 0...65 Hz
approx. 2,1 W/690 V
< 3,5 mA (400V AC L-PE)
< 5,0 mA (690V DC)
DT = 30s
4 min
> 12V AC/DC
-15°C...55°C
max. 85% rel. H.
CAT III / 690 V
2
IP 64
D IN EN 61243-3,
DIN VDE 0682 part 401,
EN 61010, IEC 61010
approx. 115 g
approx. 210 x 55 x 21 mm