Cleaning And Maintenance - Imetec R7609 Instrucciones De Uso

WARNING!
or under the sheets when in use.
EN
AUTO SHUT OFF TIMER
The heated mattress cover has an automatic shut off timer of 1, 3 or 9 hours. When
switched on, the control unit automatically sets itself to 1 hour on the auto shut off timer
and LED 1h lights up in green (10). To set a different auto shut off timer, press the timer
selector button (6) and select the desired timer. Each time the auto shut off timer is
reset, the timer starts from zero. When the time has elapsed, the heated mattress cover
switches off and the standby LED (9) lights up in blue.
NOTE: Should the power supply accidentally be interrupted during use, when
the control unit is switched back on, it will maintain the temperature and timer
settings in use previously and the timer counter will start from zero.
NOTE: So that the display light does not bother users during the night, the
light intensity reduces around 15 seconds after any button is last pressed.
Similarly, the standby LED becomes less bright 15 seconds after it is activated.
SWITCHING OFF
Switch the heated mattress cover off by pressing the ON/OFF button (7) and remove the plug
from the socket (3).
The heated mattress cover is washable. Check the washing symbols on the label to
ensure it is washed correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the underblanket
before cleaning or performing maintenance.
BEFORE WASHING
• Take the plug of the control unit cable out of the mains socket (3).
• Press the grip levers at the sides of the control unit connector (2) to remove the control
unit connector from the heated mattress cover connector (1).
MACHINE WASHING
• The heated mattress cover can be cleaned in the washing machine at 30°C, on a delicate cycle.
• Use only the delicate cycle for spinning. DO NOT make an additional spinning cycle.
17
DO NOT place the control unit under the pillow

CLEANING AND MAINTENANCE