Maintenance - Imetec E9001 Instrucciones De Uso

you wish to trim with the blade locking device.
Using the shaving brush (10)
Brush the beard downwards or in any direction you wish to the length
EN
to go towards.
Clean the appliance immediately after each use and when there is
hair or dirt trapped in the trimming unit.
•
Switch the appliance off with the ON/OFF button (2).
•
Remove the head being used by pressing the middle of the blades
upwards with your thumb [Fig. D2].
•
Use the brush (12) to remove residual hair [Fig. F1].
•
Dry all the components with a soft cloth and make sure they are
completely dry before re-using them or putting them away.
•
Do not clean the appliance with powder or abrasive liquid such as
alcohol or petrol.
•
Do not immerse the appliance in water or any other form of liquid
as to do so can damage it.

MAINTENANCE

WARNING!
appliance from the mains supply before
cleaning or performing maintenance.
WARNING! Always turn off the appliance
before replacing the accessories.
WARNING! Before every use of the
appliance lubricate the blades well along
their entire length using the oil supplied
Always disconnect
24
the