Important Safety Instructions; Cleaning; Disposal - Stiga BT 48 Li 2.0 Manual De Instrucciones

CHARGER MOUNTING
This charger can be installed hanging on
a wall using two screws (not supplied).
Locate the placement for the
charger to be wall mounted.
• If fastening to wood studs use 2 wood screws.
CG 48 Li
Drill two holes
2 3/8" (6 cm) on
center ensuring
they are level.
• If fastening to drywall use wall anchors and
screws to secure the charger to the wall.
NOTE If the battery and the charger won't be
used for a long time, please remove the battery
from the charger and pull out the AC power plug.

IMPORTANT SAFETY INSTRUCTIONS

• SAVE THESE INSTRUCTIONS -
DANGER: TO REDUCE RISK OF FIRE
OR ELECTRIC SHOCK CAREFULLY
FOLLOW THESE INSTRUCTIONS.
• Confirm the voltage available at each
country location before using the charger..

6. CLEANING

To avoid risk of fire, electric
shock, or electrocution:
• Do not use a damp cloth or detergent
on the battery or battery charger.
• Always remove the battery pack before
cleaning, inspecting, or performing
any maintenance on the tool.
Wipe the outside of the charger with a dry, soft
cloth. Do not hose down or wash with water.
CGF 48 Li
Drill two holes 5
3/4" (14,5 cm) on
center ensuring
they are level.

7. DISPOSAL

Do not dispose of electrical equipment
with household waste material. In
observance of European Directive
2012/19/EC on waste electrical and
electronic equipment and its implementation in
accordance with national regulations, electric
equipment that has reached the end of its life
must be collected separately and recycled in an
ecologically compatible way. If electrical
equipment is disposed of in dumps or in landfills,
hazardous substances can leak into the
groundwater and get into the food chain,
damaging your health and well-being. For further
information on the disposal of this product,
contact a domestic waste collection authority or
your dealer.
At the end of their useful life, discard
batteries with due care for our
environment.The battery contains material
which is hazardous to you and the
environment. It must be removed and disposed of
separately at a facility that accepts lithium-ion
batteries
Separate collection of used products and
packaging allows materials to be
recycled and used again.Re-use of
recycled materials helps prevent environmental
pollution and reduces the demand for raw
materials.
EN - 5