Power Sources; Location Of Control - AXIL NA1101 Manual Del Usuario

AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC inlet at the
back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches
your local voltage. Make sure that the AC power cord is fully inserted into the appliance.
Notes:
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
BATTERY POWER (Batteries not included)
Insert 8 batteries into the battery compartment, type LR14, UM-2 or C cells,(preferably alkaline ) with
the correct polarity as indicated by "+" and "-" inside the compartment. Always remove the batteries
when the set will not be used for a long period of time, as this will cause leakage to the batteries and
subsequently damage to your set.
Notes:
- Use the batteries of the same type. Never use different types of batteries together.
- Disconnect the AC power cord when use the set with batteries.
- When inserting new batteries, do not try to mix old batteries with the new ones.
1. USB port.
f
/+10: MP3 folder up/+10track.
2.
3. h: During CD/MP3/USB playback, press to skip
track backward.
4. g: During CD/MP3/USB playback, press to skip
track forward.
5. DISPLAY: Display information during CD/MP3/USB
playback.
6. i: Press to stop CD/USB playback or erase a CD/
USB program.
7. CD DOOR: Open it up to place CD disc.
8. d/k
:
- play or pause CD/USB play
- switch between USB and CD mode.
9. FM ANTENNA: to improve FM reception.
10. PLAY MODE/PROGRAM
- select different play modes.
- program and review the programmed track number.
Power source

Location of control

4
2 5
3
5
6 7 9
10
1 8