DeLOCK 86106 Manual Del Usuario página 5

English
No connection LED / Single Beep
If the Remote is not connected to the Main unit with a cable, or the
cable has no intact conductors, the No Connection LED will light and
the Beeper will sound once.
Connected LED / 3 Beeps / Short LED / Numbered LEDs
If the Connected LED lights, the Beeper emits 3 beeps, and the
Short LED lights, the cable has a fault. The Numbered LEDs indicate
the location of a short. Note: The Numbered LEDs only indicate the
location of the shorts. The other connections in the cable are not
indicated. If more than 3 numbered LEDs light, there may be multiple
shorts in the cable.
Connected LED / 2 Beeps / Cross LED / Numbered LEDs
If the Connected LED lights, the Beeper emits 2 beeps, and the
Cross LED lights, the cable has a fault. Note: In the Cross-mode, the
Number LEDs indicate connections but do not indicate the location of
the cross.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any
purpose, regardless in which way or by which means, electronically
or mechanically, without explicit written approval of Delock.
Edition: 02/2016
- -
4