Count Down - HYGIPLAS CF916 Manual De Instrucciones

Telephone Helpline: 0845 146 2887
OPERATION:

COUNT DOWN

1. Press [T1] to select timer 1.
2. Press[HR], [MIN] and [SEC] to set the desired count down time. *
3. Press [START/STOP/MEMORY] to start TIMER 1 's [T1] count down.
4. Press the button again to pause.
5. Press the buton once more to resume count down.
6. The timer will sound when display value becomes 0:00 00 and will be counting
up to show the elapsed time.
7. Press [START/STOP/MEMORY] to stop TIMER 1.
8. Press the button again to recall the momorized preset value.
9. Press [CLEAR] to clear all values.
10. Press T2, T3 or T4 to select the desired timer.
11. Repeat step 2 to 9 to set and run the selected timer.
COUNT UP
1. Press T1, T2, T3, or T4 to select the desired timer.
2. Press [CLEAR] to clear display values.
3. Press [START/STOP/MOMERY] to start count up.
4. Press the button again to pause.
5. Press the button once more to resume count up.
* During setting the values, press and hold the [HR], [MIN] or [SEC] button will
increase the values automatically.
* All active timers [T1] to [T4] are shown in the top right corner of the display
* The static characters in the corner of the display [T1] to [T4] relate to the
timer reading on the display; the flashing characters relate to the other
active timers
UK
3