MS 50604 Manual De Instrucciones página 14

7. Adjust the main switch to select the appropriate humidity.
8. When the water used off, the safety system will stop the spray circuit
automatically, the unit won't spray anymore. If you want to use the unit
continuously, you should be switch off the unit, then add the new water in
the water tank.
VI. Maintains and Cleaning:
Make sure switch off the unit and pull out the power plug before cleaning:
Water is usually hard in some place, with high contents of calcium and
magnesium ions, in addition, purifying agents like bleaching powders are
used in some regions, therefore, when the humidifiers are put into use,
some calcium magnesium ions will be atomized along with the water
mist and dispersed on some body surfaces and ground surface, forming
thermonatrite like "white powder" after frying, some ions will deposit on
the surfaces of transducer and water basin and form incrustation all these
are caused by impurity of water, incrustation on the transducer's surface
will influence the humidification effect.
1. To clean the water tank (once two week): Take out the water tank
cover, clean the inside of water tank with soft cloth, then scour it by purity
water.
2. To clean the water basin (one time one week): Clean the water basin
with soft cloth or soft brush, then scour it by purity water.
3. To clean the transducer: If there is some incrustation on its surface,
you can drop some cleaning agent on it, such as oxalic acid or citric acid,
clean by the cotton, then scour by purity water.
4. Renew water in the water tank frequently to keep it clean.
5. Do not leave water in the water tank or basin during a long idle time.
6. Clean, mop up or dry all parts of the humidifier by airing and then
put them into the original packing box fro storage.