Carton Contents; Removing The Blade - AGP SCS7 Instrucciones De Seguridad

UNPACKING
Carefully remove the tool and all loose items from the shipping container. Retain all packing materials until
after you have inspected and satisfactorily operated the machine.
NOTE: An appropriate diamond blade must be mounted to the machine before operating. Refer to the
section of this manual: "INSTALLING THE BLADE"

CARTON CONTENTS

Stone Cutting Circular Saw Machine
* Vacuum hose connector
* Parallel guide
* Quick-release water hose coupling
* L-hex wrench
TO INSTALL THE BLADE
1.
Remove any accumulated debris in the guards and around
the arbor.
2. First mount the Inner Flange, then the blade, making sure
the direction of rotation arrow of the blade and the arrow
on the machine are in the same direction.
3.
Mount the Outer Flange, Washer and Arbor Bolt.
4.
Press the Arbor Lock and rotate the spindle until the Arbor
Lock engages. Then tighten the Arbor Bolt using the L-Hex
Wrench.
NOTE: Use blades that have an arbor bore which can fit, and
that are rated for the machine's maximum rated speed or
higher.

REMOVING THE BLADE

Removal is the opposite of installing the blade.
GB
Inner Flange
7
Outer Flange
Arbor Bolt &
Washer
Blade