Intermec SF51 Manual De Instrucciones página 3

SF51 4-Bay Charger Instructions
The SF51 4-Bay Charger (Model 074646) is an accessory for the
SF51 Cordless Scanner. These instructions explain how to install
and use the charger.
To use the charger you also need these items (sold and ordered
separately):
• 4-bay AC power supply (P/N 851-088-xxx)
• Country-specific power cord
To install the charger (optional), you need mounting hardware
appropriate for the thickness of the mounting surface.
To prevent fire or electric shock, do not expose the
battery charger to rain or moisture.
You must use the appropriate Intermec power
supply with this device or equipment damage may
occur.
Installing Horizontally
1 Using the charger as a template, mark and drill four holes in
the mounting surface.
2 Attach the power
connector from the
AC power supply to
the charger, and route
the cable through the
cable feed.
3 Attach the charger to
the mounting surface
using appropriate
mounting hardware through the four holes in the charger and
the mounting surface.
Power
Cable
connector
feed
3