Intermec SF51 Manual De Instrucciones página 5

4 Install the appropriate mounting hardware (not included)
through the two holes you drilled in Step 2 leaving a 0.64 cm
(1/4 in) gap between the mounting surface and screw head.
5 Place the keyhole slots on the charger base over the screw
heads and slide the charger down until it locks into place.
#10 pan head wood
screw (2 places)
A
B
6 If necessary, attach the appropriate power adapter to the AC
power supply.
7 Connect the power supply to an AC power outlet.
Charging the SF51
Status
light
5