Care And Maintenance; Back Panel; Unit - Sharp FP-A40U Manual De Operación

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including
the filters periodically.
When cleaning the unit, be sure to first unplug the power cord, and never handle the
plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

BACK PANEL

Whenever dust accumulates
Care Cycle
on the unit or every 2 months
Gently remove dust from the back panel, using a vacuum cleaner attachment or similar
tool.
<When the back panel has stubborn dirt>
1
In case of heavy dirt, soak the back panel in water with a small amount of kitchen
detergent.
(Approx. 10min.)
(Avoid scrubbing the back panel when washing.)
2
Rinse the back panel repeatedly with clean water to remove
the solution residue.
3
Drip dry the panel to remove excess water.

UNIT

Care Cycle
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed
to remain, they may become difficult to remove.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
(Pre-filter)
Whenever dust accumulates on the unit or every 2 months
E-3
Back Panel