Amann Girrbach CERAMILL airstream Modo De Empleo página 13

!
warnIng anD
saFety InstrUCtIons:
Ceramill Airstream was developed to be used
in the dental laboratory. Initial and further
operation are to be in line with the operating
instructions. The manufacturer does not take
responsibility for any damages that result from
any other application or inappropriate handling.
In addition, the user is obliged to use the device
on his own responsibility and to see before
use whether the device is appropriate for the
intended purpose unless this is defined in the
operating instructions.
_ Please do not vacuum sharp objects!
_ Please keep off "extraction" always, before
your take out the mains plug. otherwise
extraction may be damaged – in the event
Issue
Extraction does not start
Extraction extremly loud
Insufficient extraction
performance
Motor switches off
Air flow extremely strong
_ Do not operate the extraction in a small
_ the ventilator on the back has to be kept
_ keep the device clean.
_ exchange filter bag and micro filter.
_ when changing the filter observe sufficient
_ keep clear the hoses.
_ Protect device against humidity always.
_ no contact with water or other liquidity!
_ Please contact technical services in the
_ always connect to grounded circuits!
Possible Cause
_ Mains plug not inserted
_ ON/OFF not switched ON
_ Fuse jumped out
_ Motor burnt out
_ Turbine has contact with case
_ Obstacle in system
_ Filter full
_ Power consumption too high
_ Carbon brushes are used
_ Motor burnt out
_ Filter not positioned correctly
U s e r M a n U a L
of which the manufacturer does not accept
any liability.
closed room and always keep enough
distance to the wall.
clear at all times.
breathing protection and take the mains
plug out beforehand!
event of motor or any other defects.
solution
_ Examine mains plug
_ Check ON/OFF switch
_ Press reset button
_ Call technical service
_ Call technical service
_ Remove obstacle
_ Exchange filter
_ Check if filter is placed properly,
press reset button
_ Call technical service
_ Call technical service
_ Examine filter
gB
at device
#
13