Parts and Accessories Included
Heat/Vapor
Barrier Film (do
not remove)
Door Safety Lock System
Roller Ring / Glass Tray
Place the Roller Ring correctly on the oven floor.
Place the Glass Tray exactly on Roller Ring.
Always use Roller Ring and Glass Tray in proper position.
1. Do not operate the oven without the Roller Ring and Glass Tray in Place.
2. Only use Glass Tray specifically designed for this oven. Do not substitute any
other Glass Tray.
3. If Glass Tray is hot, allow to cool before cleaning or placing in water.
4. Do not cook directly on Glass Tray unless otherwise indicated. Always place food
in a microwave safe dish, or on a rack set in a microwave safe dish.
5. Glass Tray can rotate in either direction.
6. If food or utensil on Glass Tray touches the oven walls, causing the tray to stop
moving, the tray will automatically rotate in the opposite direction. This is normal.
Note: Beep Sound:
When a Pad is pressed correctly, a beep will be heard.
If a Pad is pressed and no beep is heard, the unit did not or cannot accept the
instruction. When operating, the oven will beep twice between programmed stages.
At the end of any complete program, the oven will beep 5 times.
Exhaust Air Vent
Roller Ring
Glass Tray
Waveguide Cover
(do not remove)
External Air Vent
Internal Air Vent
Control
Panel
Door Release Button
Identification Plate
13