Preparation Of The Printer - Canon Pixma TS5000 Serie Guía De Inicio

Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
a Tap Settings on the HOME screen, and then tap
Canon_ij_XXXX on the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list, see
"Preparation of the Printer" below to operate the
printer, and then repeat step a.
b Tap the installed application software.
c Follow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on your
environment.
d Make sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.

Preparation of the Printer

a Press the HOME button on the printer.
b Use the {, }, [, or ] button to select the icon
on the lower left of the HOME screen, and then
press the OK button.
a
b
a Tap the installed application software.
b Follow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Preparation of the Printer" below to operate the
printer, and then wait for a while until a message
appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
c Make sure that the following screen appears.
c Use the [ or ] button to select Yes or No, and
then press the OK button.
d Use the { or } button to select LAN settings
> Wireless LAN > Wireless LAN setup > Easy
wireless connect in order, and then press the OK
button.
e Use the [ or ] button to select Yes, and then
press the OK button.
f Return to the operation of your smartphone.
7