You In The Picture-Self-Timer - Nokia N91 Guía De Usuario

Exposure modes
• To set the camera to take six pictures in a sequence,
select Options
the sequence mode with the Self-timer. See "You in
the picture—self-timer," p. 38. The pictures are
automatically saved in Gallery.
After you take the pictures, they are shown in a grid
on the main display. To view a picture, press the
joystick to open it.
• To set the camera to take pictures in low light
conditions, select
You in the picture—self-timer
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self-timer
or 30 seconds. To activate the self-timer, select Activate.
The self-timer indicator (
when the timer is running. The camera takes the picture
after the selected delay elapses. You can also use the
timer in the sequence mode. See "Exposure modes," p. 38.
Adjust color
To enable the camera to reproduce colors more accurately,
or to add effects to your pictures or videos, select
Adjust, and select from the following options:
38
> Sequence mode. You can also use
Options > Night mode
> 10 seconds, 20
) blinks and the device beeps
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Color tone—Select a color effect from the list.
The screen display changes to match any settings made,
showing you how the change affects the pictures or videos.
The settings return to the default settings when you close
the camera.
Adjust still image camera settings
To change the main settings, select
These settings remain the same until you change them.
Select from the following options:
Image quality—High, Normal, or Basic. The better the
image quality, the more memory the image consumes.
Image resolution—Select the resolution you want to use.
seconds,
The higher the image resolution, the more memory the
image consumes. The quality of a zoomed picture is lower
than that of a nonzoomed picture.
Default image
Self-
For example, if you set Beach as the default name, Camera
will name the pictures you take Beach, Beach(001),
Beach(002), and so on, until you change the setting again.
Show captured
the captured image after it is taken, or
Options >
to continue taking pictures immediately.
Memory in use—Select where to store your images.
Options
name— Set a name for the pictures taken.
img.—Select Yes if you want to see
No
> Settings.
if you want