Default
nickname—Enter your default nickname
(20 characters maximum) that is displayed to other users.
Your service provider may have disabled this option in
your device. For more information, contact your network
operator or service provider.
Show my PTT
address—Select
calls,
In all
calls, or Never. Your service provider may have
disabled this option in your device. For more information,
contact your network operator or service provider.
Show my login
status—Select
your status to be shown or
to be hidden.
Connection settings:
Domain—Enter the domain name obtained from your
service provider.
Access point
name—Enter the push-to-talk access
point name. The access point name is needed to
establish a connection to the GSM/GPRS network.
Server
address—Enter the IP address or domain name
of the push-to-talk server obtained from your service
provider.
User
name—Enter your user name obtained from your
service provider.
PTT
password—Enter a password, if required, to make
a data connection. The password is usually provided by
the service provider and is often case-sensitive.
68
In 1 to 1
calls,
In group
Yes
whether you want
No
if you want your status
Log in to push to talk
Press
, and select
My Own
talk automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to groups that were active when the application
was last closed. If the connection is lost, the device
automatically tries to log back in until you choose to
exit push to talk.
Exit push to talk
Select
Options
> Exit.
Switch Push to talk off after
exiting application?
is displayed. Select
the application active on the background or
out and close the service.
If several applications are open and you want to switch
from one application to another, press and hold
Make a one-to-one call
Select
Options
>
PTT
contacts.
Scroll to the contact you want to talk to from the list
and select
Options
>
Talk 1 to
Press and hold
the entire time you are talking.
When you have finished talking, release
You must end the one-to-one call before you can
create a new call. Select
Disconnect
>
Push to
talk. Push to
Yes
to keep
No
to log
.
1.
.
or press
.